| |
|
|
High lumen installation
projector - Yet small enough to use table top.
|
|
BrilliantColor™
Unlike projectors using conventional DLP® technology
which employs a four-segment color wheel, the PH-1001X uses
a six-segment color wheel and takes full advantage of BrilliantColor™ technology
from Texas Instruments®. This broader color range enables
far more realistic color reproduction, especially in the
yellow and light blue hues. |
 |
|
Variable
Illumination
The PH-1001X offers a wide choice of software-based color
modes. Each mode is achieved by adjusting the illumination
on different segments of the color wheel. Users can choose
the optimal color balance to suit their projecting needs.
Choose: Standard mode; Graphics mode; Presentation mode;
or Movie mode. In Presentation Mode, brightness is enhanced
by emphasizing RGB segments, while in "Graphics mode" the
Y and C segments are highlighted to emphasize color reproduction.
These and other color modes can be selected for different
kinds of presentation situations. |
 |
|
Networked Control
In order to be of more convenient use in the work environment,
Taxan the PH-1001X has both networking and remote control
features. The RJ45 jack and wired LAN functionality make
it possible to perform a variety of operations indirectly,
including power on/off, brightness adjustment, contrast
adjustment, video-source and sound-mute, etc. |
 |
|
Multiple Interfaces
for Extensive Connectivity (See Terminals Below)
Input: DVI-I, mini D-sub 15-pin, HDMI, component, S-Video,
composite
Output: Mini D-sub 15-pin, DC 12 V (screen trigger function)
Audio output (variable) are provided, allowing you to change
the volume of the external speakers by adjusting the projector’s
volume level. |
|
Direct
power on/off
Turn the projector power on and off from the main power switch
The projector can be powered on (off) by plugging it into
(unplugging if from) an AC outlet. If the projector is suspended
from the ceiling, it can be powered on and off by using the
associated circuit breaker switch, rather than using a remote
control. |
|
Linked
screen trigger function
Ideal for use with large motorized screens!
The screen trigger (DC12V) enables automatic raising and
lowering of a motorized screen when the projector is powered
on and off. This is ideal for venues with large motorized
screens such as conference rooms. (Note: Some motorized screens
may not support the screen trigger function.) |
|
Wall
Color Compensation
Ideal for indoor or outdoor use when no screen is available!
This function delivers color reproduction very similar to
than projected on a white surface, even when a colored wall
or blackboard is used in place of a screen. |
 |
|
Advanced
features utilizing Wired LAN (RJ45)
• Automatically receive projector status reports by
e-mail!
This feature automatically sends a message to the preset
e-mail address when an event such as a burned out lamp or
product failure occurs. Control and manage the projector
from a Web browser via a LAN link!
• The projector can be controlled and its operating
status monitored remotely using a standard Web browser running
on a personal computer linked to a LAN to which the projector
is also connected. It is also possible to manage multiple
projector connected to a single network. This functionality
enables centralized control vial a network or using a control
panel.
 |
|
Easy
lamp replacement
Lamp replacement is easy even in ceiling
mounted installations!
Since the lamp can be accessed from the top of the projector,
anyone can replace the lamp very easily, whether the projector
is on a desktop or mounted on the ceiling. |
 |
|
|
- BrilliantColor™
- High Lumens - 4200
- High contrast ratio of 2300:1
- Variable Illumination
- HDMI and other high-definition connections
- Wired LAN functions
|
| |
|
| Terminals: |
|
|
| |
|
|
TOP |
|
|
