| |
DIGITAL
PROJECTOR BUNDLE SPECIAL
|
|
Taking full advantage
of BrilliantColor™
|
|
Get
4000 hours of lamp life with the extra lamp
With this Special Offer, you receive an extra lamp --
for a total of two lamps and a total lamp life of 4000
hours. When you have an extra lamp you don't have to worry
that your presentation will be cut short when the lamp
in the projector expires.
The
extra lamp is a $369 value! |
 |
|
BrilliantColor™
Unlike projectors using conventional DLP® technology
which employs a four-segment color wheel, the PV100 Series
uses a six-segment color wheel and takes full advantage of
BrilliantColor™ technology from Texas Instruments®.
This broader color range enables far more realistic color
reproduction, especially in the yellow and light blue hues. |
 |
|
Variable
Illumination
The PV100 Series offers a wide choice of software-based color
modes. Each mode is achieved by adjusting the illumination
on different segments of the color wheel. Users can choose
the optimal color balance to suit their projecting needs.
Choose: Standard mode; Graphics mode; Presentation mode;
or Movie mode. In Presentation Mode, brightness is enhanced
by emphasizing RGB segments, while in "Graphics mode" the
Y and C segments are highlighted to emphasize color reproduction.
These and other color modes can be selected for different
kinds of presentation situations. |
 |
|
Lens
shutter with image muting
A lens shutter is used in place of a lens cap. Besides protecting
the lens, the shutter can be used to pause and resume presentations
without turning off the power; plus there is no need to worry
about misplacing the lens cap. |
 |
|
Connect
two PCs at the same time
With two computer input connectors, two PCs can be hooked
up to the projector simultaneously. Input can be switched
on the go, without plugging and unplugging. This feature
allows a wide variety of presentation possibilities, such
as using one PC for slides and one for video. |
 |
|
|
- BrilliantColor™
- High contrast ratio of 2000:1
- Variable Illumination
- Auto Keystone Correction (Vertical)
- RS232C Connector
- Auto-source features automatically identifies the input as
RGB or Video before projecting.
- Full-Auto Adjust: automatically adjusts the phase, clock
speed, and resolution of the RGB signal.
|
| |
|
| Terminals: |
Connectors on
the rear panel are provided for COMPUTER IN connector (×2),
MONITOR OUT connector, RS232C, S-VIDEO connector, and VIDEO
connector, thereby allowing a wide variety of presentation
styles. |
|
| |
|
|
TOP |
|
|
